Specification Sheet PDF

lumenlink™
Specification Sheet
POWER LINE COMMUNICATION PHASE COUPLER
Client
Project name
Order#Type
Qty
DESCRIPTION:
Lumenlink is a router that connects multiple phases and circuits to share
Lumentalk’s control signal over an entire network of fixtures.
FEATURES AND BENEFITS:
Physical :
• Steel enclosure and cover, 16 gauge
• Epoxy textured grey powder coat finish inside and out
• 1/2” NPT provision holes
Performance :
• Operating temperatures: 0° C to 50° C [32F to 122F]
• Interior applications only
Electrical :
*Strain relief connectors and cables by others.
• Line voltage interface for 100 to 277V, 3 phases
(Neutral connection required - if neutral is not available consult factory prior to installation)
8"
[203mm]
4 1"
16
[103mm]
FRONT VIEW
6"
[153mm]
6"
[153mm]
TOP VIEW
RIGHT VIEW
1/3
© Copyright Lumenpulse 2016
2016.07.08
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
NK - R6
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenlink™
Specification Sheet
POWER LINE COMMUNICATION PHASE COUPLER
TYPICAL WIRING DIAGRAM
Local installations (0-10V shown, US wire colors)
*Lumentranslator card must remain accessible.
Circuit #1
Typical lumenline fixture - lumentalk dimming - Circuit #1
Lumentranslator 0-10V
Circuit #1
0-10V Dimmer
Circuit #1
Data input
from the dimmer
(typical #24-2 cable by others)
*Maximum distance between
dimmer and lumentranslator is 50’ [15m].
100-277V
CIRCUIT #1
(3 conductor
cable by others)
Technical room
100-277V INPUT
UP TO 3 PHASES
(by others)
Circuit #2
Electrical Panel
Typical lumenline fixture - lumentalk dimming - Circuit #2
Dimming signal from Lumentranslator on Circuit #1
P1
P2
Lumenlink
P3
120-277V
CIRCUIT #2
(3 conductor
cable by others)
Wiring detail
PHASE #1 - LINE
(BLACK)
DMX +
DMX -Ground
PHASE #3 - LINE
(BLUE)
PHASE #2 - LINE
(RED)
CE wire color / US wire color / USE
240/277V
100V or
277/480V
Yellow/Green
Blue
Brown
Black
Grey
Green
White
Black/ Brown
Red/ Orange
Blue/ Yellow
Ground
Neutral
Line 1
Line 2
Line 3
Neutral connection required - if neutral is not available
consult factory prior to installation
DMX INPUT (OPTIONAL)
100-277V
CIRCUIT #3
(3 conductor
cable by others)
Circuit #3
Typical lumenline fixture - lumentalk dimming - Circuit #3
Dimming signal from Lumentranslator on Circuit #1
Consult factory for integration with dimmer rack.
2/3
© Copyright Lumenpulse 2016
2016.07.08
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
NK - R6
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenlink™
Specification Sheet
POWER LINE COMMUNICATION PHASE COUPLER
HOW TO ORDER
Select:
LNK
1
Select:
2
3
1
Housing:
LNK - Lumenlink™
2
Voltage:
100 - 100 volts
120 - 120 volts
208 - 208 volts
220 - 220 volts
240 - 240 volts
277 - 277 volts
3
Finish:
GT - Standard grey polyester - epoxy textured
CC - Custom color and finish (please specify RAL color)1
Notes:
1
North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color
charts. Final color matching results may vary.
3/3
© Copyright Lumenpulse 2016
2016.07.08
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
NK - R6
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.