BMS DEFINITION

BMS DEFINITION- ADVANTAGES, FEATURES
mart buildings use certain automated processes that work in concert to regulate and control essential
building systems, including HVAC, lighting, power, utility use, and closed-circuit cameras. This
technology is made up of building management BMS FIELD DEVICES and systems – BMS that can
“communicate” with each other and carry out complex instructions based on the current state of
different subsystems. This type of communication requires software and hardware that can be
coordinated, supervised and controlled through the building’s network. All Extron control systems
integrate seamlessly with smart buildings and BMS.
Electrical Boxes: -
Extron IP Link Pro control processors support common BMS protocols such as BACnet, KNX and DALI in
the form of device drivers, without the need for additional hardware or firmware. These BMS
PROTOCOL allow centralized supervision and control of mechanical and electrical systems, including
HVAC, lighting, power, and security.
WHAT IS BMS?
Conduit Bodies And Fittings:-
A BMS or building management system allows the automation and centralized control of buildings to
turn them into true “smart buildings”

Building Management Systems (BMS), or building management systems, are increasingly used in all
types of public and private property. Its function is to improve management and control, moving
towards the concept of smart building.
BMS FEATURES
Gfci Circuit Breakers:-
BMS are often put into practice in large projects with big automatic, electrical, and plumbing systems.
The BMS system is an important component in managing energy demand. Improperly configured BMS
systems are thought to account for 20% of construction energy, or about 8% of total US energy
consumption.
The four basic functions of a central, computer controlled BMS are as follows:
 Controller
 Monitoring
 Optimization
 Report
WHAT IS BACNET?
Metal And Nonmetallic Conduit:-
BACnet protocol is a data communication networks Building Automation and Control (B uilding A
utomation and C ontrol Net works ). A DDC PANEL is a set of rules that govern the exchange of data in a

computer network. The rules take the form of a written specification that describes what is required to
conform to the protocol.
WHAT IS AN HID CARD?
It’s a card where the reader needs to be in a certain promixity to the card to validate it. Typically the
proximity is touching the card to the reader. The card acts as an rfid tag and responds with identification
information to the reader when in the range of the reader. Typically its triggered with electromagnetic
fields.
WHAT IS A TURNSTILE
Miniature Circuit Breakers :-
In its most basic form, a turnstile is just a gate that manages the flow of pedestrian traffic by allowing
people to pass in one or two directions. However, many turnstiles have advanced features that can be
integrated with other ACCESS CONTROL STANDARDS to enhance security and control the flow of people.
For example, the turnstile can accommodate a variety of badge readers such as keyboards, card readers,
biometric readers, and more. It can also be integrated with a people counting system to monitor
pedestrian traffic.
What are BMS BENEFITS?
It allows centralized control and supervision of all elements of the building.
Facilitates rapid detection of incidents for preventive maintenance .
Automating supervisory tasks increases staff productivity .
These benefits are not only available to new buildings: with a relatively low investment, it is possible to
upgrade an existing property using a BMS system to make it a smart building BY ACCESS CONTROL
SYSTEM OVERVIEW.
Business Name :- my engineering worldwid
Addressc :- Saudi Arabia
Phone No :- 562521111
Visit Us :-
https://myengineerings.com/