See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/340716619
Dual Capacitive Probe Method for Non-contact High Voltage Measurements
Thesis · March 2016
DOI: 10.13140/RG.2.2.34358.16961
CITATIONS
0
READS
2,038
1 author:
Nygmetzhan Kuzenbayev
Nazarbayev University
13 PUBLICATIONS89 CITATIONS
SEE PROFILE
All content following this page was uploaded by Nygmetzhan Kuzenbayev on 17 April 2020.
The user has requested enhancement of the downloaded file.
March 2016
Dual Capacitive Probe Method for
Non-contact High Voltage
Measurements
by
Nygmetzhan Kuzenbayev
An Honours report submitted for the Degree of
BEng in Electrical Power and Energy
at the
Heriot-Watt University
ii
“Non scholae sed vitae discimus”
iii
Abstract
Safe and reliable transmission is vital for the operation of the electrical power
system. Transmission line fault may occur at any location along the line.
Therefore, voltage monitoring of power lines is necessary. Novel dual capacitive
non-contact high voltage measurement method is described in this research paper.
The measurement system was designed and manufactured. It was tested in high
voltage laboratory facilities of the university. Error estimations were performed in
order to determine the accuracy of the system.
iv
Acknowledgements
I would like to thank my project supervisor, Dr Paul Record, for his guidance and
assistance through the project, and Barry Lorimer for his help with conducting the
experiments. I would also like to thank my family and friends for their patience
and support.
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
/
60
100%
