Modeling Distributed and Renewable Systems Introduction to Simulation with Simscape Power Systems = G Jonathan LeSage, PhD Senior Application Engineer - Energy and Automation MathWorks, Inc. © 2017 The MathWorks, Inc. 1 Renewable/Microgrid Series Topics Distributed and Renewable Systems Addressing Validation Requirements Modeling and Simulation Integrated Workflows G G Testing Grid Codes and IEEE Standards Deploy Vendor Agnostic Algorithms Validating Controls C and PLC Code Generation Energy Management Systems Supervisory Control Design G Grid Integration Studies Real-Time Testing of Controllers V = t G 2 Example Microgrid One-Line Diagram 13.8 kV 5 kV = = G 0.2-1 MW 500 kW 1 MW PV 500 kW 500 kW 3 Introduction to Simscape Power Systems = = G P V 4 Implementing Microgrid One-Line Diagram in Simulink Island Microgrid at 15 seconds Add 300 kW Load at 35 seconds 5 Phasor and Electromagnetic Transient Comparison 7 Hybrid Phasor-EMT Simulation Different “powergui” settings per subsystem 8 Hybrid Phasor-EMT Simulation Scaling up simulation size – IEEE 123 Node Distribution Feeder with Hybrid Phasor-EMT EMT Phasor 9 Renewable/Microgrid Series Topics Distributed and Renewable Systems Addressing Validation Requirements Modeling and Simulation Integrated Workflows G G Testing Grid Codes and IEEE Standards Deploy Vendor Agnostic Algorithms Validating Controls C and PLC Code Generation Energy Management Systems Supervisory Control Design G Grid Integration Studies Real-Time Testing of Controllers V = t G 10 Deployment to Real-Time target 11