Exp. D8R4 for AV-300i

GE Industrial Systems
GE Industrial Systems
INSTRUCTIONS
8 Digital Inputs
4 Relay Outputs
D8R4 expanded I/O
for AV-300i Drives

© 2000 General Electric Company, USA.
All rights reserved.
Supersedes GEI-100425 Rev 0.1 03/99
These instructions do not purport to cover all details
or variations in equipment, nor to provide every
possible contingency to be met during installation,
operation, and maintenance. If further information
is desired or if particular problems arise that are not
covered sufficiently for the purchaser’s purpose,
the matter should be referred to GE Industrial
Systems, Salem, Virginia, USA.
This document contains proprietary information of
General Electric Company, USA and is furnished to
its customer solely to assist that customer in the
installation, testing, operation, and/or maintenance
of the equipment described. This document shall
not be reproduced in whole or in part nor shall its
contents be disclosed to any third party without
the written approval of GE Industrial Systems.
AV300i is a trademark of General Electric Company. USA.
National Electric code and NEC are registered trademarks of the
National Fire Protection Association.

3
—————— I/O Expansion card ——————
D8R4 expanded I/O
SAFETY SYMBOL LEGEND / LÉGENDE DES SIGNES
DE SÉCURITÉ
WARNING!Commands attention to an operating procedure, practice,
condition, or statement which, if not strictly observed,
could result in personal injury or death.
Attire l’attention sur les modes d’utilisation et les
procédés et conditions d’exploitation qui, en cas
d’inobservation, pourraient entraîner des blessures
corporelles ou la mort.
CAUTION!Commands attention to an operating procedure, practice,
condition, or statement which, if not strictly observed,
could result in damage or destruction of equipment.
The seriousness of the injuries and of the damages which
could be caused by the non- observance of such
indications, depends on the different conditions.
Anyway, the instructions given below should always be
followed with the highest attention.
Attire l’attention sur les modes d’utilization et les
procédés et conditions d’exploitation qui, en cas
d’inobservation, pourraient entraîner la détérioration
ou la destruction des appareils.
La gravité des blessures et des dommages matériels
possibles dépendent de différent facteurs. Toutefois, les
instructions mentionées ci-dessous devraient être
toujours suivies avec la plus grande attention.
NOTE!Commands attention to an operating procedure, practice,
condition, or statement that must be highlighted.
Attire l’attention sur les modes d’utilization et les
procédés et conditions d’exploitation qui présentent
un intéret particulier.

—————— I/O Expansion card ——————
4
GEI-100425A

5
—————— I/O Expansion card ——————
D8R4 expanded I/O
Table of Contents
SAFETY SYMBOL LEGEND / LÉGENDE DES SIGNES DE
SÉCURITÉ ............................................................................... 3
Chapter 0 - SAFETY PRECAUTIONS / PRECAUTIONS DE
SECURITÉ ............................................................................... 6
Chapter 1 - INTRODUCTION ..................................................... 12
Chapter 2 - MOUNTING ............................................................ 13
Chapter 3 - TERMINAL BOARD POINTS................................... 14
3.1 DIGITAL INPUTS TERMINAL BOARD POINTS .................................. 14
3.2 RELAY OUTPUTS TERMINAL BOARD POINTS ................................... 14
3.3 FUNCTIONAL OVERVIEW ................................................................... 15
Chapter 4 - TECHNICAL DATA .................................................. 17
Dimensions and Weight ............................................................................. 17
General Data ............................................................................................. 18
Digital Inputs ............................................................................................. 18
Relay Outputs ............................................................................................ 18
Temperature .............................................................................................. 18
Chapter 5 - ACCESSORIES ....................................................... 19
Chapter 6 - MAXIMUM WIRE SIZES ........................................ 19