Check Valve Manufacturer Valvesonly is one of the greatest Check Valve Manufacturer . A check valve is a type of valve that allows fluid to flow in one direction while automatically preventing the reverse flow. Check valves are designed to automatically prevent reverse flow without any manual intervention, making them a useful component in a variety of fluid control systems. It is a type of valve that prevents fluid from flowing in the reverse direction. It opens automatically when fluid flows in the forward direction, and closes automatically when fluid flow stops or reverses. They can be made from a variety of materials, including steel, stainless steel, cast iron, bronze, and plastic. The choice of material will depend on the specific application and the chemical and physical properties of the fluid being controlled. The aim of a check valve is to prevent reverse flow, minimize pressure drop, and ensure efficient fluid flow in a variety of fluid control applications. Check valves are designed to operate automatically, providing reliable and efficient control over fluid flow in a range of settings. In a check valve, fluid flows through the valve body and into the check valve disc, which is attached to a stem. The disc opens automatically when fluid flows in the forward direction, allowing the fluid to flow through the valve. When fluid flow stops or reverses, the disc closes, preventing reverse flow. Valvesonly is well known Check Valve Manufacturer . Itisfamous for its premium quality products which comes in various design and materials. All the products are tested according to requirements and standards. Types of check valves: Swing check valve Wafer check valve Ball check valve Lift check valve Dual plate check valve Silent check valve Non-slam swing check valve Tilting disc check valve Pressure seal check valve Disk Check Valve Piston Check Valve Duo check valve Advantages of check valve: It can be used as horizontally or vertically Prevents back flow Serves as a backup system Low-pressure drop increases energy savings Check valves are cheap, effective, and have many solutions to a potential issue Industries of check valve Description: Chemical Industry Pulp and Paper Industry Marine Industry Mining Industry Power Generation Industry Oil and Gas Industry Nuclear Industry Petrochemical Industry Body Material- Cast Iron and Cast Steel (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), Duplex and Super duplex STEEL [ F51, F53, F55 ] Forged Steel A105, A105N, F11, F22, F304, F316, F91] , Alloy20 , Hastelloy ALBR. Size- ½” – 80” Class-150 – 2500; PN10 – PN-450 Ends-threaded, socket weld, butt weld, flanged, lug, wafer https://valvesonly.com/product-category/check-valve/ Safety Valve Manufacturer Valvesonly is one of the largest Safety Valve Manufacturer . A safety valve is a device that automatically releases pressure from a pressure vessel or system when the pressure exceeds a predetermined set point. It is a critical component in many industrial and commercial processes and is used to prevent damage to equipment and personnel. A safety valve is a pressure relief device that opens automatically to release pressure when the system pressure exceeds a set level. Safety valves can be made from a variety of materials, including stainless steel, brass, and other materials that are resistant to corrosion and high temperatures. The primary aim of a safety valve is to protect equipment and personnel by automatically releasing pressure when the set pressure is exceeded. It also helps to maintain system stability and prevent damage to equipment. Safety valves work by releasing the pressure from a pressure vessel or system to the atmosphere or a secondary containment area. The pressure is released through a controlled opening in the valve, which is designed to open when the set pressure is exceeded. Valvesonly is a top Safety Valve Manufacturer and are designed to automatically discharge the gas pressure or liquid from any pressure-containing system. To fulfill this, a safety valve should be properly sized, maintained, and installed. Different Types of safety valves: Steam safety valve Thermal safety valve Conventional Safety Valve Pressure safety valve Bellow seal safety valve Pilot-operated safety valve Safety relief valve Advantages of Safety valve: Prevents equipment damage Protects personnel Maintains system efficiency Regulatory compliance Cost-effective Industries of the safety valve: Oil & Gas Industry Petrochemical Industry Energy Industry Chemical Industry Mining Industry Sugar Industry Marine Industry Textile Industry Description: Body Material – Cast Iron and Steel (A216 WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91], WCB, WC6, SS304, SS316, DUPLEX STEEL. Class – 150 – 2500 PN 10 – PN 450 Size – ½ - 24” Ends- Butt welded, Socket welded, Flanged, Threaded https://valvesonly.com/product-category/safety-valve/ Butterfly Valve Manufacturer Valvesonly is the greatest Butterfly Valve Manufacturer. Butterfly valves are quarter-turn valves that are used to regulate fluid flow in pipelines. They are characterized by a disc that rotates within the valve body to control the flow. A butterfly valve is a type of flow control valve that uses a flat disc to regulate the flow of liquids or gases. The disc rotates on a central axis within the valve body to control the flow rate. Butterfly valves can be manufactured from a range of materials, including carbon steel, stainless steel, and aluminium. The choice of material depends on the specific requirements of the application, such as temperature and corrosion resistance. The main aim of a butterfly valve is to control the flow of liquids or gases in pipelines, regulate pressure, temperature, and flow rate, and ensure the safe and efficient operation of pressurised systems and equipment. They can be manufactured to meet industry standards such as API, ASME, and DIN. The flow path of a butterfly valve is a straight through design, which allows for minimal pressure drop and turbulence in the flow. Valvesonly is the leading Butterfly Valve Manufacturer and which provides compact construction results in low weight, less space in storage and installation. It is also available in different size and design as per the demands. Parts: Body Disc Stem Seat Handle or Actuator O-rings and Gaskets Bearings Types of butterfly valves: Zero Offset Butterfly Valve Double Offset Butterfly Valve Triple Offset Butterfly Valve Metal Seated Butterfly Valve Lug Butterfly Valve Wafer Butterfly Valve High Performance Lug Butterfly Valve High Performance Wafer Butterfly Valve Advantages: Compact size Low-pressure drop Fast operation Cost-effective Easy maintenance Versatile Tight shutoff Description: Body Material: Cast Carbon steel (WCC, WCB, WC6), Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F31L, F91], DUPLEX STEEL and Super duplex Steel (F51, F53, F55), Cast iron, Ductile Iron. Size – 2” – 48” Class: 150 to 300; PN 6 – PN 25 Ends: Wafer, flanged, lug Operations: Lever-operated, gear-operated, pneumatic actuated, and electric actuated. https://valvesonly.com/product-category/butterfly-valve/