CIRCUIT INTEGRE REGUL ATEUR DE TENSIO N catalogue 2010 REGULATEUR DE TENSION TO 92 ■ Spécifications techniques Input Voltage (max) 30 V Current (max) 100 mA Tension positive CODE 7805 TO92 7806 TO92 7808 TO92 7812 TO92 7815 TO92 7818 TO92 DÉSIGNATION 1 10 25 Régulateur positif + 5 V 100 mA Régulateur positif + 6 V 100 mA Régulateur positif + 8 V 100 mA Régulateur positif + 12 V 100 mA Régulateur positif + 15 V 100 mA Régulateur positif + 18 V 100 mA 0.55 0.55 0.55 0.55 0.55 0.80 0.47 0.47 0.47 0.47 0.47 0.68 0.39 0.39 0.39 0.39 0.39 0.56 Tension négative CODE 7905 TO92 7912 TO92 7915 TO92 DÉSIGNATION 1 10 25 Régulateur négatif -5 V 100 mA Régulateur négatif -12 V 100 mA Régulateur négatif -15 V 100 mA 0.65 0.65 0.65 0.55 0.55 0.55 0.45 0.45 0.45 REGULATEUR DE TENSION REGULATEUR DE TENSION TO 3 ■ Spécifications techniques Input Voltage (max) 35 V 7824 40 V Current (max) 1.5 A Tension positive CODE DÉSIGNATION 1 5 10 7805 TO3 7806 TO3 7808 TO3 7812 TO3 7815 TO3 7818 TO3 7824 TO3 Régulateur positif + 5 V 1.5 A Régulateur positif + 6 V 1.5 A Régulateur positif + 8 V 1.5 A Régulateur positif + 12 V 1.5 A Régulateur positif + 15 V 1.5 A Régulateur positif + 18 V 1.5 A Régulateur positif + 24 V 1.5 A 3.30 3.30 3.30 3.30 3.30 3.30 3.30 2.97 2.97 2.97 2.97 2.97 2.97 2.97 2.64 2.64 2.64 2.64 2.64 2.64 2.64 LM 309 K LM 323 K Régulateur positif + 5 V 1 A Régulateur positif + 5 V 3 A 4.50 5.80 4.05 5.22 3.60 4.64 TO 220 Tension négative CODE 7905 TO3 7912 TO3 7915 TO3 7924 TO3 DÉSIGNATION Régulateur négatif -5 V 1.5 A Régulateur négatif -12 V 1.5 A Régulateur négatif -15 V 1.5 A Régulateur négatif -24 V 1.5 A ■ Spécifications techniques Input Voltage (max) 35 7824 V 40 Current (max) V 1.5 A Tension positive DÉSIGNATION 1 10 25 78M 05 78M 12 78M 15 CODE Régulateur positif + 5 V 500 mA Régulateur positif + 12 V 500 mA Régulateur positif + 15 V 500 mA 0.80 0.80 0.80 0.68 0.68 0.68 0.56 0.56 0.56 7805 TO220 7806 TO220 7808 TO220 7809 TO220 7810 TO220 7812 TO220 7815 TO220 7818 TO220 7824 TO220 Régulateur positif + 5 V 1.5 A Régulateur positif + 6 V 1.5 A Régulateur positif + 8 V 1.5 A Régulateur positif + 9 V 1.5 A Régulateur positif + 10 V 1.5 A Régulateur positif + 12 V 1.5 A Régulateur positif + 15 V 1.5 A Régulateur positif + 18 V 1.5 A Régulateur positif + 24 V 1.5 A 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 7805 BT 7812 BT Régulateur positif + 5 V 1.5 A Régulateur positif + 12 V 1.5 A 0.90 0.90 0.76 0.76 0.63 0.63 Tension négative CODE DÉSIGNATION 1 10 25 79M 05 79M 15 Régulateur négatif - 5 V 500 mA Régulateur négatif - 15 V 500 mA 1.40 1.40 1.19 1.19 0.98 0.98 7905 TO220 7906 TO220 7908 TO220 7912 TO220 7915 TO220 7918 TO220 7924 TO220 Régulateur négatif -5 V 1.5 A Régulateur négatif -6 V 1.5 A Régulateur négatif -8 V 1.5 A Régulateur négatif -12 V 1.5 A Régulateur négatif -15 V 1.5 A Régulateur négatif -18 V 1.5 A Régulateur négatif -24 V 1.5 A 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.45 0.45 0.45 0.45 0.45 0.45 0.45 332 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 5 10 3.35 3.35 3.35 3.35 3.01 3.01 3.01 3.01 2.68 2.68 2.68 2.68 REGUL ATEUR DE TENSIO N CIRCUIT INTEGRE catalogue 2010 REGULATEUR DE TENSION AJUSTABLE ■ Spécifications techniques Temperature Range 0 to 125 °C (T package) TO 220 Thermal Resistance Junction-case 4 °C/W Thermal Resistance Junction-ambient 50 °C/W (K package) TO 3 Thermal Resistance Junction-case 2.3 °C/W Thermal Resistance Junction-ambient 35 °C/W (H package) TO 39 Thermal Resistance Junction-case 12 °C/W Thermal Resistance Junction-ambient 140 °C/W TO 92 Tension positive ON Semiconductor CODE Les régulateurs de tension positifs réglables LM317T, LM 317K peuvent débiter un courant de 1.5 A max. soit en boîtier TO220 ou en boîtier TO3. La tension de sortie est réglable entre 1.2 V et 37 V (1.2 V à 57 V pour les modèles LM317HVK). Le coefficient de régulation en fonction de la tension d’entrée et du courant de charge est meilleur que pour les régulateurs de tension fixes habituels. Leurs emplois sont particulièrement aisés du fait qu’ils sont livrables en 2 versions de boîtier différente et que 2 résistances extérieures suffisent pour déterminer la valeur de la tension régulée. Une protection totale, limitation du courant de sortie protection thermique, et protection de l’aire de sécurité, reste efficace même si la broche permettant de fixer la tension de sortie n’est pas connectée. Courant de sortie : 1.5A. Coefficient de régulation en fonction de Vi : 0.01% typ. Coefficient de régulation en fonction de la température : 0.1% typ. Taux de filtrage : 80 dB. DÉSIGNATION 1 5 10 0.70 0.80 4.00 7.20 0.59 0.68 3.40 6.12 0.52 0.60 3.00 5.40 10.20 8.67 7.65 U max. 40 V LM317 TO92 LM317 T LM317 K LM317 H Rég. positif + 1.2 V à 37 V TO 92 Rég. positif + 1.2 V à 37 V TO 220 Rég. positif + 1.2 V à 37 V TO 3 Rég. positif + 1.2 V à 37 V TO 39 LM317 HVK Rég. positif + 1.2 V à 57 V U max. 60 V TO 3 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 333 CIRCUIT INTEGRE REGUL ATEUR DE TENSIO N catalogue 2010 REGULATEUR DE TENSION AJUSTABLE REGULATEUR DE TENSION AJUSTABLE ■ Spécifications techniques ■ Spécifications techniques Power Dissipation Internally Limited Input-Output Voltage Differential Storage Temperature Range Lead Temperature (Soldering, 10 seconds) Power Dissipation Internally Limited 35 V Input-Output Voltage Differential -65 to 150 °C Storage Temperature Range 300 °C Lead Temperature (Soldering, 10 seconds) 0 to 125 °C Operating Junction Temperature Range Thermal Resistance Junction-case 1.4 °C/W Thermal Resistance Junction-ambient 35 °C/W Operating Junction Temperature Range ST Microelectronics CODE LM 338 K 334 1.2 - 37 V / 5 A - Tension positive DÉSIGNATION Régulateur de tension TO 3 1 5 10 8.20 6.97 6.15 35 V -65 to 150 °C 300 °C 0 to 125 °C Thermal Resistance Junction-case 1.5 °C/W Thermal Resistance Junction-ambient 35 °C/W ST Microelectronics CODE LM 350 K LM 350 T 1.2 - 32 V / 3 A - Tension positive DÉSIGNATION Régulateur de tension Régulateur de tension TO 3 TO 220 1 5 10 27.30 2.60 23.20 2.21 20.47 1.95 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com REGUL ATEUR DE TENSIO N CIRCUIT INTEGRE catalogue 2010 REGULATEUR DE TENSION AJUSTABLE REGULATEUR DE TENSION AJUSTABLE ■ Spécifications techniques ■ Spécifications techniques Input Output Voltage Differential Output Current Power Dissipation 40 V 1.5 A Internally Limited Temperature Range -65 to 150 °C Operating Junction Temperature Range LM337 0 to 125 °C TO 220 Thermal Resistance Junction-case Max 3 °C/W Thermal Resistance Junction-ambient Max 70 °C/W Thermal Resistance Junction-case Max 4 °C/W Thermal Resistance Junction-ambient Max 35 °C/W TO 3 DC Input Voltage 40 V Peak Input Voltage (10 ms) 60 V Dropout Voltage 32 V Output Current internally limited Power Dissipation internally limited Storage Temperature -55 to 150 °C Operating Junction Temperature -25 to 150 °C Thermal Resistance Junction-case 3 °C/W Thermal Resistance Junction-ambient 50 °C/W Tension positive ST Microelectronics CODE L 200 CV DÉSIGNATION FAIRCHILD SEMICONDUCTOR CODE PRIX UNITAIRE Régulateur de tension PENTAWATT 5 2.80 Tension positive / 1 A DÉSIGNATION MC 7815 TO220 3-Terminal 1A Positive Voltage Regulator TO 220 Tension négative ST Microelectronics CODE LM 337 T LM 337 K DÉSIGNATION Régulateur de tension Régulateur de tension TO 220 TO 3 1 5 10 1.10 6.10 0.94 5.18 0.83 4.57 FAIRCHILD SEMICONDUCTOR CODE 5 10 0.42 0.38 Tension négative / 1 A DÉSIGNATION MC 7915 TO220 3-Terminal 1A Negative Voltage Regulator TO 220 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 0.50 1 5 10 0.61 0.52 0.46 335 CIRCUIT INTEGRE REGUL ATEUR DE TENSIO N catalogue 2010 REGULATEUR DE TENSION AJUSTABLE REGULATEUR DE TENSION AJUSTABLE ■ Spécifications techniques Output current 700 Input voltage 125 V 0 ot 125 °C Operating Temperature Range mA ■ Spécifications techniques Input Voltage (max) For regulator 35 V 24 to 40 V Ces régulateurs de tension série sont des circuits intégrés monolithiques conçus pour délivrer des tensions positives bien régulées. leurs caractéristiques particulièrement élaborées permettent de les utiliser à pleine puissance jusqu’à 1.5 A de courant de charge. Une limitation interne de courant, une protection thermique et une protection de l’aire de sécurité des darlingtons de sortie assurent une complète sécurité dans la plupart des conditions d’emploi. Le boîtier TO 3 acier étanche dans lequel ils sont réalisés leur confèrent une haute fiabilité et une très faible résistance thermique. Une diode de référence faible bruit à haute stabilité en température est l’élément clé assurant un excellent coefficient de température. La présence de cette dernière ajoutée à une très faible impédance de sortie, leur assure des performances exceptionnelles particulièrement en régulation charge. Haute tension TEXAS INSTRUMENTS dans la limite des stocks disponibles CODE TL 783 CKC DÉSIGNATION Régulateur de tension TO 220 1 5 10 3.96 3.56 3.37 Tension positive CODE DÉSIGNATION PRIX UNITAIRE Positifs LAS 1505 LAS 1518 LAS 1520 Régulateur positif + 5 V 1.5 A Régulateur positif + 18 V 1.5 A Régulateur positif + 20 V 1.5 A 10.00 9.00 9.00 LAS 1415B Régulateur positif + 15 V 3 A 2% 15.00 ■ Spécifications techniques Négatifs LAS 1808 LAS 1812 LAS 1815 LAS 1824 Régulateur négatif -8 V 1.5 A Régulateur négatif -12 V 1.5 A Régulateur négatif -15 V 1.5 A Régulateur négatif -24 V 1.5 A 10.00 12.00 15.00 10.00 LAS 18A12 LAS 18A15 Régulateur négatif -12 V 1.5 A 2% Régulateur négatif -15 V 1.5 A 2% 12.00 10.00 Output current 150 Input voltage 40 V 0 to 70 °C Operating Temperature Range mA ■ Spécifications techniques Output current 100 mA Low Quiescent Current 75 µA 5V, 3V, and 3.3V versions available CODE NATIONAL SEMICONDUCTOR CODE DÉSIGNATION LP 2950 CZ 336 Régulateur de tension TO 92 Faible consommation 1 10 25 1.20 1.20 1.20 Tension positive TEXAS INSTRUMENTS UA 723 CN UA 723 CH DÉSIGNATION Régulateur de tension Régulateur de tension DIP 14 TO 99 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 10 25 0.90 3.60 0.76 3.06 0.67 2.70 CIRCUIT INTEGRE REGUL ATEUR catalogue 2010 REGULATEUR POSITIF LOW DROPOUT REGULATEUR POSITIF LOW DROPOUT ■ Spécifications techniques ■ Spécifications techniques Input/Output Drop Typ. 0.4 V Output Current 400 mA DC Input Voltage + 35 V DC Input Reverse Voltage - 18 V Junction and Storage Temperature Range 4 °C/W Thermal Resistance Junction-ambient Max. 75 °C/W 5 V / 400 mA ST Microelectronics L 4805 DÉSIGNATION Régulateur LDO 1.5 A Line Regulation 0.015 % Load Regulation 0.1 % - 55 to + 150 °C Thermal Resistance Junction-case Max. CODE Output Current 1 TO 220 5 2.70 10 2.43 2.16 LINEAR TECHNOLOGY CODE LT 1086 CT 2.85V, 3.3V, 3.6V, 5V, 12V / 1.5 A DÉSIGNATION Régulateur LDO TO 220 1 5 10 4.20 3.99 3.78 ■ Spécifications techniques Output current in excess 100 mA Maximum Junction Temperature 125 °C REGULATEUR A DECOUPAGE -65 to +150 °C ■ Spécifications techniques Lead Temp. (Soldering, 10 seconds) 230 °C Output Current ESD Tolerance 2000 V Output Voltage Range 5.1 to 40 V Duty Cycle Range 0 to 100 % Switching Frequency up to 200 KHz Very High Frequency up to 90 % Thermal Resistance Junction-case (max) 3 °C/W Thermal Resistance Junction-ambient (max) 35 °C/W Storage Temperature Range CODE DÉSIGNATION Régulateur LDO Régulateur LDO A 5 V / 100 mA NATIONAL SEMICONDUCTOR LM 2931 LM 2931 AZ5 4 TO 220 TO 92 1 5 10 2.40 1.00 2.16 0.90 1.92 0.80 ■ Spécifications techniques Dropout voltage typically 0.5V @IO = 1 A Output current in excess of 1 A Temperature Range -55 to 125 CODE LM2940 CT5 DÉSIGNATION Régulateur LDO °C 5V/1A NATIONAL SEMICONDUCTOR TO 220 1 5 10 1.50 1.35 1.20 ■ Spécifications techniques Temperature Range -40 to +125 °C 4A ST Microelectronics CODE L 296 DÉSIGNATION 1 5 10 High Current Switching Regulator MULTIWATT 15 7.93 7.14 6.74 Prix par quantité ! 1.5 - 15 V / 5 A NATIONAL SEMICONDUCTOR CODE DÉSIGNATION LM 1084 ITADJ Régulateur LDO TO 220 1 5 10 2.30 2.30 2.30 Nous consulter. Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 337 CIRCUIT INTEGRE REGUL ATEUR catalogue 2010 REGULATEUR A DECOUPAGE REGULATEUR A DECOUPAGE ■ Spécifications techniques ■ Spécifications techniques Output Current Output Voltage Range 2.5 A Supply voltage 8 to40 V 5.1 to 40 V Reference output current 0 to 50 mA ±2 % Current through CT terminal –0.03 to –2 mA Timing resistor 1.8 to 100 kΩ Precise on chip Reference Thermal Resistance Junction-case (max) 4 °C/W Timing capacitor Thermal Resistance Junction-ambient (max) 50 °C/W Operating free air temperature CODE LM 3524 0.001 to 0.1 µF 0 to +70 °C DÉSIGNATION 1 10 25 Regulating Pulse-Width Modulators DIP 16 1.75 1.49 1.40 ■ Spécifications techniques 2.5 A ST Microelectronics CODE DÉSIGNATION L 4960 Power Switching Regulator MULTIWATT 7 1 5 10 5.18 4.66 4.40 Output Current 100 Operating Range 3.5 to 15 mA V Operating Junction Temperature Range 0 to 100 °C LINEAR TECHNOLOGY CODE LT 1054 CN8 1.23V - 37 V / 0.5 A NATIONAL SEMICONDUCTOR CODE DÉSIGNATION LM 2574N ADJ SIMPLE SWITCHER™ 0.5 A Step-Down Voltage Regulator DIP 8 1 5 10 1.50 1.35 1.27 DÉSIGNATION Switched-Capacitor Voltage Converters With Regulator DIP 8 1 5 10 4.57 4.34 4.11 ■ Spécifications techniques Wide Input Voltage Range Low Quiescent Current Internal Switch Operating Junction Temperature Range TO 220 5 broches / CODE DÉSIGNATION LM 2576 T5 Step-Down Voltage Regulator TO 220 1 10 25 6.00 5.40 5.10 TO 220 5 broches / CODE DÉSIGNATION LM 2576 ADJ 338 Step-Down Voltage Regulator TO 220 5V/3A ADJ / 3 A 1 5 10 7.38 6.56 LT 1172 CN8 mA 1.25 A °C 100 KHz 100 KHz / 1.25 A LINEAR TECHNOLOGY 8.20 V 6 0 to 125 Switching Frequency CODE 3 to 60 DÉSIGNATION 1 5 10 High Efficiency Switching Regulators DIP 8 3.80 3.61 3.42 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com CIRCUIT INTEGRE REGUL ATEUR catalogue 2010 REGULATEUR A DECOUPAGE CONTROLEUR ■ Spécifications techniques PWM ■ Spécifications techniques Output Current 500 mA 4.5 to 12 Supply Voltage 40 V Collector Output Current 100 0 to 70 °C Reference Output Current 50 mA High Efficiency 60 % Current Through CT Terminal –5 mA Input Regulation 0.2 % Total Power Dissipation at Tamb = 70°C Output Regulation 0.4 % Storage Temperature Range Input voltage Operating free-air temperature mA 1000 mW – 65 to 150 °C 0 to 70 °C 80 °C/W Operating Ambient Temperature Range: Thermal Resistance Junction-ambient TEXAS INSTRUMENTS CODE TL 497 CN DÉSIGNATION Switching Voltage Regulator DIP 14 1 5 10 2.75 2.48 2.34 300 KHz INTERSIL CODE Dans la limite des stocks disponibles CODE TEA 2018 DÉSIGNATION Current Mode Switching Power Supply Control Circuit DIP 8 SG 3524 N 1 10 25 2.86 2.43 2.29 DÉSIGNATION 1 5 10 Regulating Pulse-Width Modulators DIP 16 1.83 1.65 1.56 ■ Spécifications techniques PROTECTION DE BATTERIE Supply Voltage 40 Collector Supply Voltage 40 V Oscillator Charging Current 5 mA Output Current, Source or Sink 500 mA Reference Output Current 50 mA Current through CT Terminal 5 mA Logic Inputs – 0.3 to + 5.5 V Analog Inputs MAXIM CODE DÉSIGNATION mW 1 5 10 Junction Temperature Range – 55 to 150 °C 6.66 6.29 Storage Temperature Range – 65 to 150 °C 0 to 70 °C Thermal Resistance Junction-pins Max 50 °C Thermal Resistance Junction-ambient Max 80 °C Operating Ambient Temperature ■ Spécifications techniques - 0.3 to +18 Output Voltages GND V - 0.3 to +18 V Peak Current Input VP (at VP = 5V) 38 mA Peak Current Input VS (at VS = 3V) 30 mA Peak Current Input PBAR or SBAR 50 mA Maximum Storage Temperature -65 to 150 °C 0 to 70 °C n/a °C/W Temperature Range Thermal Resistance Junction-case Thermal Resistance Junction-ambient 150 °C/W INTERSIL CORPORATION DÉSIGNATION 1 5 10 Automatic Battery Back-up Switch DIP 8 1.83 1.65 1.56 500 KHz ST Microelectronics CODE SG 3525 CODE V 1000 7.40 Input Supply Voltage GND ICL 7673 – 0.3 to Vi Total Power Dissipation at Tamb = 70 °C MAX 713 CPE NiCd/NiMH Battery Fast-Charge Controllers DIP 16 V DÉSIGNATION 1 5 10 Regulating Pulse-Width Modulators DIP 16 2.35 2.11 2.00 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 339 CIRCUIT INTEGRE CO NTROLEUR PWM catalogue 2010 CONTROLEUR PWM ■ Spécifications techniques CONTROLEUR PWM ■ Spécifications techniques Power Supply Voltage 42 V Supply Voltage 30 V Collector Output Voltage 42 V Output Current ±1 A Collector Output Current 500 mA Amplifier Input Voltage Range –0.3 to +42 V Power Dissipation @ TA 3 45°C 1000 mW Lead Temperature (Soldering, 10sec) 80 °C/W Operating Temperature 0 to 70 °C Thermal Resistance Junction–to–Ambient Operating Ambient Temperature Range Power Dissipation at TA=25°C 1200 mW -65 ~ +150 °C +300 °C 0 ~ + 70 °C Max. Duty Cycle UC3842/UC3843 100 % Max. Duty Cycle UC3844 50 % Storage Temperature Range UNDER-VOLTAGE LOCKOUT SECTION Start Threshold UC3842/UC3844 17.5 V Start Threshold UC3843 9.0 V 11.5 V 8.2 V Thermal Resistance Junction-ambient 100 °C/W FAIRCHILD SEMICONDUCTOR max 500 KHz Min. Operating Voltage (After Turn On) UC3842/UC3844 CODE TL 494 CN DÉSIGNATION Switchmode Pulse Width Modulation ControlCircuit DIP 16 1 2.78 10 2.36 25 2.22 ■ Spécifications techniques Supply Voltage 40 V Collector Output Current 100 mA Reference Output Current 50 mA Current Through CT Terminal –5 mA Power Dissipation at TA = +25°C 1000 mW Power Dissipation at TC = +25°C 2000 mW Operating Junction Temperature Range –55 to +150 °C Storage Temperature Range –65 to +150 °C Min. Operating Voltage (After Turn On) UV3843 CODE TEXAS INSTRUMENTS CODE DÉSIGNATION UC 2524 N Advanced Regulating Pulse Width Modulators DIP 16 1 10 25 4.12 3.71 3.50 UC 3842 UC 3843 UC 3844 DÉSIGNATION SMPS Controller SMPS Controller SMPS Controller DIP 8 DIP 8 DIP 8 1 10 25 1.80 1.80 1.80 1.53 1.53 1.53 1.35 1.35 1.35 Faites économies sur vos achats en volume ! des Contactez-nous. TEXAS INSTRUMENTS CODE UC 2843 340 DÉSIGNATION Current-Mode PWM Controller DIP 8 1 10 25 4.85 4.36 4.12 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com CIR CUIT DE SUPERVISIO N CIRCUIT INTEGRE catalogue 2010 CIRCUIT DE SUPERVISION CIRCUIT DE SUPERVISION ■ Spécifications techniques ■ Spécifications techniques Trip Point 4.0 to 4.24 Pushbutton Detect 2.4 to 3.3 Operating temperature -40 to +85 V Nom. Reset Thresh. 4.58 Active-Low Reset Output °C V Push-Pull Active-High Reset Output Push-Pull Min. Reset Time Adj., 140 to 280 ms Nom. Watch dog Time Adj., 1.6 sec Max. ICC 110 µA MAXIM CODE DS 1233 15 DÉSIGNATION 5V EconoReset TO 92 1 5 10 1.45 1.38 1.31 MAXIM CODE ■ Spécifications techniques Nom. Reset Thresh. 4.65 V DÉSIGNATION MAX 807 NCPE Full-Featured µP Supervisory Circuit with ± 1.5% Reset Accuracy DIP 16 1 5 10 15.44 13.90 13.12 ■ Spécifications techniques 10 V RESET Output Voltage 10 V 50 mA -40 to 85 °C Clamp Diode Forward Current MAXIM CODE MAX 690 Input Supply Voltage DÉSIGNATION 1 Microprocessor Supervisory Circuit 6.40 DIP 8 5 10 5.76 5.44 Operating temperature CODE DÉSIGNATION 1 10 25 MC 33164 P5 5 V Undervoltage Sensing Circuit TO 92 0.95 0.81 0.76 ■ Spécifications techniques Dif Power Supply Voltage 40 V Output Current 300 mA 0 to 70 °C Op Ambient Temperature ■ Spécifications techniques Nom. Reset Thresh. CODE MAX 691 4.65 DÉSIGNATION 1 Microprocessor Supervisory Circuit 7.01 DIP 16 V 5 10 6.31 5.96 DÉSIGNATION Overvoltage Crowbar Sensing Circuit 1 10 25 1.94 1.65 1.55 DIP 8 ■ Spécifications techniques MAXIM CODE CODE MC 3423 P DÉSIGNATION 1 MAX 691 CPE Microprocessor Supervisory Circuit 12.35 DIP 16 5 10 11.12 10.50 Supply voltage High-level output current RESET Low-level output current, RESET Operating free air temperature range 3.5 - 18 V –16 mA + 16 mA 0 to 70 °C MAXIM CODE MAX 693 DÉSIGNATION 1 Microprocessor Supervisory Circuit 6.86 DIP 16 5 10 6.17 5.83 CODE TL 7705 DÉSIGNATION Supply Voltage Supervisors DIP 8 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 5 10 1.37 1.23 1.16 341 CIRCUIT INTEGRE DRIVER catalogue 2010 INTERFACE DARLINGTON DRIVERS/ CONTROLE PAS A PAS DARLINGTON ■ Spécifications techniques ULN 2002 ULN 2003 ULN 2004 Collector-emitter Voltage (input open) 90 V Input Voltage 30 V Collector Current 3 A Storage Temperature -55 to 150 °C Operating Junction Temperature -25 to 150 °C Thermal Resistance Junction Ambient Powerdip Max 70 °C/W Thermal Resistance Junction Pins 9 to 16 Powerdip Max 14 °C/W Thermal Resistance Junction-case Multiwatt Max 3 °C/W ■ Spécifications techniques Output Voltage 50 V Input Voltage 30 V Continuous Collector Current 500 mA Continuous Base Current 25 mA Operating Ambient Temperature Range – 20 to 85 °C Storage Temperature Range – 55 to 150 °C Junction Temperature 150 °C Thermal Resistance Junction-ambient Max. 70 °C/W 1 5 10 L 702 B CODE 2A Quad Darlington Switch POWERDIP 8+8 3.76 3.38 3.20 L 702 N 2A Quad Darlington Switch MULTIWATT 11 5.79 5.21 4.92 ■ Spécifications techniques ULN2002 14-25V PMOS Output Voltage ULN2003 5V TTL, CMOS Output Sustaining Voltage ULN2004 6–15V CMOS, PMOS Output Current ST Microelectronics CODE DÉSIGNATION ULN 2002 ULN 2003 ULN 2004 Seven Darlington Arrays Seven Darlington Arrays Seven Darlington Arrays DIP16 DIP16 DIP16 1 10 25 0.79 0.67 0.67 0.67 0.57 0.57 0.63 0.54 0.54 ULN2802 14-25V PMOS ULN2803 5V TTL, CMOS ULN2804 6–15V CMOS, PMOS CODE DÉSIGNATION ULN 2802 ULN 2803 ULN 2804 Octal Darlington Arrays Octal Darlington Arrays Octal Darlington Arrays DIP18 DIP18 DIP18 1 10 25 1.16 0.92 1.01 0.99 0.78 0.86 0.93 0.74 0.81 50 35 V V 1.75 A Input Voltage 15 V Input Current 25 mA Supply Voltage 10 V Power Dissipation at Tpins = 90 °C 4.3 W Operating Ambient Temperature Range – 20 to 85 °C Storage Temperature – 55 to 150 °C CODE ULN 2068 342 DÉSIGNATION DÉSIGNATION 1 10 25 50V/1.5A Quad Darlington Switches POWERDIP 12+2+2 1.83 1.56 1.46 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com CIRCUIT INTEGRE DRIVER catalogue 2010 DRIVERS/ CONTROLE PAS A PAS DRIVERS/ CONTROLE PAS A PAS ■ Spécifications techniques ■ Spécifications techniques Supply voltage 10 Input signals 7 V Total power dissipation(Tamb = 70°C) Storage and junction temperature V Power Supply Voltage 50 V Logic Supply Voltage 7 V 1 W Logic Input Voltage 6 V -40 to + 150 °C Reference Input Voltage 15 V Output Current (DC operation) 1.2 A – 55 to + 150 °C 150 °C Storage Temperature Operating Junction Temperature CODE PBL 3717 A DÉSIGNATION Stepper Motor Driver DIP 16 1 10 25 2.44 2.07 1.95 ■ Spécifications techniques ST Microelectronics CODE L 297 DÉSIGNATION Stepper Motor Controllers DIP 20 1 5 10 10.06 9.05 8.55 Wide Voltage Range 10 to 50 V Wide Range of Current Control 5 to 1500 mA Output Current ±1.5 A Junction Temperature +150 °C 0 to 70 °C Operating Ambient Temperature Range ■ Spécifications techniques Supply Voltage 10 Input Signals 7 V Total Power Dissipation (Tamb = 70°C) 1 W -40 to 150 °C 80 °C/W Storage Temperature Thermal Resistance Junction-ambient Max. V CODE TEA 3718 DÉSIGNATION Stepper Motor Driver POWERDIP 12+2+2 1 10 25 5.32 4.52 4.26 ■ Spécifications techniques Supply voltage range 9.5 to 18 V 4.5 mA Supply current, unloaded CODE L 6506 DÉSIGNATION Current Controller For Stepping Motors DIP 18 1 5 10 4.82 4.34 4.10 ■ Spécifications techniques Single Supply Operation 7.2 to 16.5 V Input voltage, all inputs HIGH (min) 7.5 V LOW (max) 4.5 V Input current, all inputs, LOW 30 µA Output current LOW 500 mA -20 to +70 °C Operating ambient temperature range 350 mA/Coil Drive Capability TTL/CMOS Compatible Inputs PHILIPS SEMICONDUCTORS CODE SAA 1027 CODE MC 3479 DÉSIGNATION Stepper Motor Driver DIP 16 1 10 25 5.25 4.46 4.20 DÉSIGNATION Stepper Motor Drive Circuit DIP 16 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 5 10 5.79 5.21 4.92 343 CIRCUIT INTEGRE DRIVER catalogue 2010 DRIVERS/ CONTROLE DE MOTEUR CIRCUIT CONTROLE ■ Spécifications techniques ■ Spécifications techniques Slew rate 30 V/ms Tension ±20 V Driver DC CODE DÉSIGNATION L 149 4 A Linear Driver PENTAWATT 5 1 5 10 4.96 4.46 4.22 ■ Spécifications techniques 36 V Input Voltage - 15 to + Vs V 0 to Vs V inhibit Inhibit Voltage Output Current 2.5 A Total Power Dissipation (Tcase = 75 °C) 25 W - 40 to + 150 °C 3 °C/W Thermal Resistance Junction-case (max) Driver DC ST Microelectronics CODE DÉSIGNATION L 292 Switch-Mode Driver For DC Motors MULTIWATT 15 8 to 18 V Operating frequency 10 to 500 Hz Ambient temperature -25 to 85 °C Output current at pin 14, 15 -10 to 400 mA Inhibit voltage -0.5 to Vs V Control voltage -0.5 to Vs V Voltage short-pulse circuit -0.5 to Vs V -200 to ± 200 µA Synchronization input current Output voltage at pin 14, 15 Vs V Output current at pin 2, 3, 4, 7 10 mA Output voltage at pin 2, 3, 4, 7 Vs V Junction temperature 150 °C Storage temperature -55 to 125 °C 80 K/W Thermal resistance system - air Power Supply Storage and Junction Temperature Supply voltage 1 5 10 9.45 8.50 8.03 Pour Triacs et Thyristors SIEMENS CODE TCA 785 DÉSIGNATION Phase Control IC DIP 16 1 5 10 4.88 4.39 4.15 DRIVERS SOLENOID ■ Spécifications techniques Driver DC CODE MC 33030 P DÉSIGNATION DC Servo MotorController/Driver DIP 16 1 5.18 10 4.40 25 4.14 – 10 to +120 W Thermal Resistance, Junction–to–Air 65 °C/W V Enable Voltage 7 V Peak Output Current (repetitive) 4.5 A Total Power Dissipation (at Tcase = 75 °C) 25 W - 40 to 150 °C 3 °C/W Driver AC ON Semiconductor DÉSIGNATION 1 5 10 Universal Motor Speed Controller DIP 16 3.59 3.23 3.05 ST Microelectronics CODE L 294 344 V °C 1 CODE 7 Thermal Resistance Junction-case (max) Maximum Power Dissipation TDA 1085 C 50 Logic Supply Voltage Storage and Junction Temperature ■ Spécifications techniques Operating Temperature Range Power Supply DÉSIGNATION Switch-Mode Solenoid Driver MULTIWATT 11 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 5 10 8.40 7.56 7.14 CIRCUIT INTEGRE DRIVER catalogue 2010 DRIVERS PUSH PULL ■ Spécifications techniques DRIVERS FULL BRIDGE ■ Spécifications techniques Supply Voltage 36 V Power Supply Logic Supply Voltage 36 V Differential Output Voltage 52 Input Voltage 7 V (between Out1 and Out2) Inhibit Voltage 7 V Input or Enable Voltage V 60 V – 0.3 to + 7 V Peak Output Current (non repetitive t = 5ms) 2 A Pulsed Output Current for 5 A Total Power Dissipation at Tground-pins = 80°C 5 W Non Repetitive (< 1 ms) 10 A –40 to +150 °C Sensing Voltage – 1 to + 4 V 60 V – 40 to + 150 °C Storage and Junction Temperature Boostrap Peak Voltage Thermal Resistance Junction-case (max) 14 °C/W Thermal Resistance Junction-ambient (max) 80 °C/W Storage and Junction Temperature L6202 Total Power Dissipation Tpins = 90°C for L6202 5 W Tamb = 70°C for L 6202 1.3 W Thermal Resistance Junction-pins (max) 12 °C/W Thermal Resistance Junction-case (max) - °C/W 60 °C/W Thermal Resistance Junction-ambient (max) L6203 Total Power Dissipation Driver DC ST Microelectronics CODE DÉSIGNATION 1 5 10 L 293 B Push-Pull Four Channel Drivers DIP 16 5.00 4.50 4.25 L 293 E Push-Pull Four Channel Drivers POWERDIP (16 + 2 + 2) 5.00 4.50 4.25 DRIVERS Tcase = 90°C for L6203 20 W Tamb = 70°C for L 6203 2.3 W Thermal Resistance Junction-pins (max) - °C/W Thermal Resistance Junction-case (max) 3 °C/W Thermal Resistance Junction-ambient (max) 35 °C/W FULL BRIDGE ■ Spécifications techniques Power Supply 50 Logic Supply Voltage 7 V –0.3 to 7 V Input and Enable Voltage V IO Peak Output Current (each Channel) – Non Repetitive (t = 100ms) –Repetitive (80% on –20% off; ton = 10ms) 3 A 2.5 A –DC Operation 2 A Sensing Voltage –1 to 2.3 V 25 W Junction Operating Temperature –25 to 130 °C Storage and Junction Temperature –40 to 150 °C Thermal Resistance Junction-case (max) 3 °C/W RThermal Resistance Junction-ambient (max) 35 °C/W Total Power Dissipation (Tcase = 75°C) ST Microelectronics 1 5 10 L 6202 CODE Commande DMOS POWERDIP 18 DÉSIGNATION 6.25 5.62 5.31 L 6203 Commande DMOS MULTIWATT 11 9.76 8.78 8.30 Prix par quantité ! Nous consulter. ST Microelectronics CODE L 298 DÉSIGNATION Commande de moteur MULTIWATT 15 1 5 10 4.70 4.23 3.99 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 345 CIRCUIT INTEGRE DRIVER catalogue 2010 DRIVERS GESTIONNAIRE D’AFFICHAGE ■ Spécifications techniques GESTIONNAIRE D’AFFICHAGE ■ Spécifications techniques Output Type LCD Operating Voltage 3 to 6 Digits or Char Supply voltage VEE = 0 V V 4 digits Output per digit/char DRIVERS 4.5 to 15 V 7 to 14 mA 1000 mV -40 to +85 °C Supply current all outputs OFF VCC = 5 V Total power dissipation 7 segments Operating ambient temperature range MAXIM CODE DÉSIGNATION ICM 7211 4-Digit, LCD Decoder/Driver DIP 40 1 5 10 4.88 4.39 4.15 ■ Spécifications techniques PHILIPS SEMICONDUCTORS Output Type LED Operating Voltage 3 to 6 Digits or Char V 4 digits Output per digit/char CODE SAA 1064 7 segments DÉSIGNATION 4-digit LED-driver with I²C-bus interface DIP 24 1 10 25 5.96 5.36 5.07 MAXIM CODE DÉSIGNATION ICM 7212 4-Digit, LED Decoder/Driver DIP 40 1 5 10 5.18 4.66 4.40 DRIVERS TRIACS/THYRISTORS ■ Spécifications techniques This series is designed for thyristor control in a variety of AC power switching ■ Spécifications techniques applications for AC input voltages of 24 V, 120 V, 208/230 V, and 277 V @ 50/60 Hz. Output Type LED Operating Voltage 4 to 6 Digits or Char V 8 digits Output per digit/char 7 seg. + Dec. Point MAXIM CODE DÉSIGNATION ICM 7218 A 8-Digit, Multiplexed, LED Decoder/Driver DIP 28 1 5 10 9.15 8.23 7.78 ON Semiconductor ■ Spécifications techniques CODE Drives LEDs, LCDs or vacuum fluorescents Expandable to displays of 100 Internal voltage reference from V 2 to 30 mA Output current programmable from CODE DÉSIGNATION LM 3914 N Dot/Bar Display Driver DIP 18 steps 1.2 to 12 1 5 10 4.27 3.63 3.20 ■ Spécifications techniques Drives LEDs, LCDs or vacuum fluorescents Expandable to displays of Internal voltage reference from CA 3059 DÉSIGNATION Zero Voltage Switch DIP 14 (case 646) 1 5 10 2.81 2.53 2.39 ■ Spécifications techniques Supply Current (IPin 5) 15 Non–Repetitive Supply Current (Pulse Width = 1.0 ms) 200 mA mA AC Synchronization Current Isync 3.0 mA 90 dB Power Dissipation 625 mW 1.2 to 12 V Thermal Resistance, Junction–to–Air 100 °C/W 1 to 30 mA – 20 to + 85 °C Output current programmable from Operating Temperature Range 3 dB/step, 30 dB range CODE DÉSIGNATION LM 3915 N Dot/Bar Display Driver DIP 18 1 5 10 4.88 4.15 3.66 ■ Spécifications techniques Drives LEDs, LCDs or vacuum fluorescents Expandable to displays of Internal voltage reference from 70 dB 1.2 to 12 V 1 to 30 mA Output current programmable from Fast responding electronic VU meter CODE DÉSIGNATION LM 3916 N 346 Dot/Bar Display Driver DIP 18 1 5 10 6.25 5.31 4.69 ON Semiconductor CODE UAA 2016 DÉSIGNATION 1 10 25 Zero volt switch power controller DIP 8 (case 626) 7.17 6.09 5.74 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com CIRCUIT INTEGRE CIR CUIT INTEGRE catalogue 2010 INTERFACE ET INTERCONNEXION Emetteur CODE 26 LS 31 DÉSIGNATION RS-422 Quad Differential Line Driver 1 5 10 1.40 1.26 1.12 Emmetteur CODE MC 1488 P DIP 16 DÉSIGNATION RS-232 Quad Line Driver DIP 14 1 5 10 0.80 0.72 0.64 Récepteur CODE 26 LS 33 DÉSIGNATION 1 5 10 RS-422 Quad Differential Line Receiver DIP 16 1.60 1.44 1.28 DÉSIGNATION 1 5 10 3.00 2.70 2.40 Récepteur CODE MC 1489 P DÉSIGNATION RS-232 Quad Line Receiver DIP 14 1 5 10 0.80 0.72 0.64 Récepteur CODE 75175 RS-422 / RS-423 / RS-485 Quadruple Differential Line Receivers with 3-state Outputs DIP 16 Récepteur CODE MC 3486 P DÉSIGNATION RS-422 Quad Differential Line Receiver With 3-State Outputs DIP 16 1 5 10 1.80 1.62 1.44 Emetteur CODE MC 3487 P DÉSIGNATION 1 RS-422 Quad Differential Line Driver 1.90 3-State, TTL-Compatible Outputs DIP 16 5 10 1.71 1.52 Emetteur Emetteur-Récepteur ANALOG DEVICES 1 10 25 ADM 232 LAN 5 V Powered CMOS RS-232 Drivers/Receivers DIP 16 CODE DÉSIGNATION 3.20 2.88 2.56 ADM 232 LAR 5 V Powered CMOS RS-232 Drivers/Receivers SO 16 3.40 3.06 2.72 CODE MC 3488 P DÉSIGNATION 1 10 25 Dual EIA-423/EIA-232D Line Driver DIP 8 4.00 3.60 3.20 DÉSIGNATION 1 5 10 2.14 1.93 1.71 Emetteur-Récepteur ANALOG DEVICES CODE DÉSIGNATION 1 10 25 ADM 485 JN +5 V Low Power EIA RS-485 Transceiver DIP 8 2.79 2.65 2.51 Emetteur CODE UA 9636 RS-232 Dual Line Driver With Adjustable Slew Rate DIP 8 Récepteur CODE UA 9637 Emetteur-Récepteur CODE ICL 232 DÉSIGNATION 1 5 10 +5V Powered Dual RS-232 Transmitter/Receiver DIP 16 2.00 1.80 1.60 DÉSIGNATION RS-422 Dual Differential Line Receiver DIP 8 1 5 10 2.14 1.93 1.71 Emetteur CODE UA 9638 DÉSIGNATION RS-422 Dual High-Speed Differential Line Driver DIP 8 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 5 10 2.14 1.93 1.71 347 CIRCUIT INTEGRE CIR CUIT INTEGRE catalogue 2010 INTERFACE ET INTERCONNEXION CODE MAX 1480 BCPI CODE MAX 220 CPE CODE MAX 232 MAX 232 CWE CODE MAX 233 CODE CODE MAX 239 CNG CODE MAX 3241 ECAI CODE MAX 485 CPA CODE MAX 488 CPA 348 DÉSIGNATION Complete, Isolated, Half-Duplex, RS-485/RS-422 Data Interface DIP 28 1 28.66 1 +5V-Powered, Multichannel RS-232 Drivers/Receivers DIP 16 MAXIM DÉSIGNATION 5V, Multi-Channel RS-232 Driver/Receiver 5V, Multi-Channel RS-232 Driver/Receiver DIP 16 SO 16 MAXIM DÉSIGNATION 5.64 5 5.08 1 5 2.70 2.40 2.43 2.16 1 5 6.90 24.36 Supply Voltage +5 V Typ. ICC 35 mA Data Rate 250 kbps 6.21 10 Supply Voltage +5 V 4.79 Typ. ICC 0.5 mA Data Rate 120 kbps 10 Supply Voltage +5 V 2.16 1.92 Typ. ICC 5 mA Data Rate 120 kbps 10 Supply Voltage +5 V 5.52 Typ. ICC 5 mA Data Rate 120 kbps 1 5 9.26 8.33 10 Supply Voltage +5 V 7.41 Typ. ICC 7 mA Data Rate 120 kbps MAXIM DÉSIGNATION 5V, Multi-Channel RS-232 Driver/Receiver DIP 24 25.79 10 MAXIM DÉSIGNATION 5V, Multi-Channel RS-232 Driver/Receiver DIP 16 5 MAXIM DÉSIGNATION 5V, Multi-Channel RS-232 Driver/Receiver DIP 20 MAX 234 CPE MAXIM 1 7.20 5 6.48 10 Supply Voltage +5.0 & +12.0 V 5.76 Typ. ICC 0.40 mA Data Rate 120 kbps MAXIM DÉSIGNATION 1 5 ±15kV, ESD-Protected, 3.0V to 5.5V, 250kbps RS-232 Transceiver SO 28 MAXIM 8.40 7.56 DÉSIGNATION 1 Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers DIP 8 MAXIM DÉSIGNATION Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers DIP 8 MAXIM 5.10 5 4.59 1 5 3.34 3.01 10 Supply Voltage +3.0 to +5.5 V 6.72 Typ. ICC 0.30 mA Data Rate 250 kbps 10 VCC +5 V 4.33 Typ. ICC 0.3 mA Data Rate 2500 kbps 10 VCC +5 V 2.84 Typ. ICC 0.12 mA Data Rate 250 kbps Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com CIRCUIT INTEGRE CIR CUIT INTEGRE catalogue 2010 GENERATEUR DE FONCTION HORLOGE TEMPS REEL ■ Spécifications techniques NV SRAM Control Supply Voltage Operating temperature range CODE ICL 8038 DÉSIGNATION Precision Waveform Generator/Voltage DIP 14 1 5 10 26.00 23.40 22.10 5 V 0 to +70 °C 64k/256k MAXIM CODE DS 1216 C CODE MAX 038 DÉSIGNATION High-Frequency Waveform Generator DIP 20 1 5 10 17.99 16.19 15.29 DÉSIGNATION SmartWatch RAM /64k/256k DIP 28 1 5 10 21.65 20.57 19.48 ■ Spécifications techniques Bus Type 3-Wire SPI Operating temperature range -40 to +85 °C GENERATEUR DE SIGNAUX 96 Bytes MAXIM CODE DS 1305 N DÉSIGNATION Serial Alarm Real-Time Clock DIP 16 1 5 10 3.75 3.56 3.38 EXAR CODE XR 2206 DÉSIGNATION Monolithic Function Generator DIP 16 1 5 10 5.95 5.35 5.06 1 5 10 9.15 8.23 7.78 Dans la limite des sotcks disponibles EXAR CODE XR 2207 DÉSIGNATION Voltage-controlled Oscillator DIP 14 CODE HD 146818 DÉSIGNATION Ic-real Time Clock DIP 24 1 5 10 9.30 8.37 7.91 GENERATEUR BASE DE TEMPS Dans la limite des sotcks disponibles CODE ICM 7213 CODE DÉSIGNATION 1 5 10 One Second/One Minute Timebase Generator DIP 14 8.69 7.82 7.39 MM 58274 DÉSIGNATION Microprocessor Compatible Real Time Clock DIP 16 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 5 10 46.00 41.40 39.10 349 CIRCUIT INTEGRE CIR CUIT INTEGRE catalogue 2010 COMPTEUR POUR AFFICHEUR TEMPORISATEUR ■ Spécifications techniques Output Type Common Cathode LED Supply Voltage 4.5 to 5.5 V 2 MHz 100 mA Speed Supply Current MAXIM CODE DÉSIGNATION ICM 7217 A 4-Digit (9999), Presetable, Common-Cathode LED Up/Down Counter DIP 28 1 5 10 12.20 10.98 10.37 ■ Spécifications techniques Output Type Common Anode LED Supply Voltage 4.5 to 5.5 V 2 MHz 200 mA Speed Supply Current Astable/Monostable / Simple CODE MAXIM CODE DÉSIGNATION ICM 7217 B 4-Digit (5959), Presetable, Common-Anode LED Up/Down Counter DIP 28 1 5 10 14.33 12.90 12.18 NE 555 P NE 556 N ■ Spécifications techniques 4-1/2 Digit up Counter Supply Voltage Speed Supply Current 3 to 6 V 15 MHz DÉSIGNATION 4 1/2-Digit (19999), LCD, High-Speed Counter/Decoder/Driver DIP 40 1 10 25 0.38 0.30 0.28 0.025 mA 1 5 10 14.64 13.18 12.44 DÉSIGNATION Dual Timer DIP 14 1 10 25 0.55 0.44 0.41 Astable/Monostable / Quadruple CODE NE 558 N MAXIM CODE Single Timer DIP 8 Astable/Monostable / Double CODE Output Type ICM 7224 DÉSIGNATION DÉSIGNATION Quad Timer DIP 16 1 10 25 2.44 1.95 1.83 ■ Spécifications techniques R-C Osc. + Fixed 8-bit divider Type Binary RC Maximum Count 128/256 Output Type CMOS Speed Supply Voltage Supply Current Operating Temperature Range Astable/Monostable / Simple 15 MHz 2 to 16 V 0.5 mA -20 to +85 °C 0 to +70 °C MAXIM CODE TLC 555 CP ICM 7242 DÉSIGNATION 1 5 10 8-Bit Binary, Programmable, RC Timer Counter DIP 8 2.62 2.36 2.23 1 10 25 0.67 0.54 0.50 Astable/Monostable / Double CODE CODE DÉSIGNATION LinCMOS Timer DIP 8 TLC 556 CN DÉSIGNATION Dual LinCMOS Timer DIP 14 1 10 25 0.75 0.60 0.56 Dans la limite des sotcks disponibles CODE DÉSIGNATION ICM 7216 A ICM 7216 C ICM 7226 A ICM 7249 350 8-Digit, Multi-Function, Frequency Counters/timers DIP 28 8-Digit, Multi-Function, Frequency Counters/timers DIP 28 8-Digit, Multi-Function, Frequency Counter/timer DIP 40 5 1/2 Digit Lcd, Micro-power Event/hour Meter DIP 48 PRIX UNITAIRE 24.39 Astable/Monostable / Simple 40.40 CODE 31.25 TS 555 CN DÉSIGNATION Low Power Single CMOS Timer DIP 8 22.26 Fax 02 31 47 36 80 • Tél. 02 31 47 53 88 • e-mail : [email protected] / www.limpulsion.com 1 10 25 0.76 0.61 0.57